In 1936 Fin-Nor revolutionized the saltwater fishing world by building the first fishing reel that could easily handle the biggest fish in the sea. It was a mix of quality materials, innovative design and attention to details. It’s the same mix that makes the Rolls Royce an automobile of the highest quality or Browning one of the best shotgun brands. These and other companies often add other products lines or allow their name to be affiliated with other products, but the top companies insist these other products measure up to the exacting standards that is their legacy.

So when Fin-Nor started producing sunglasses, I expected nothing less than the exceptional quality and performance I experienced the few times I’ve used Fin-Nor reels. They met my expectations.

I normally don’t get far into the weeds delving into the technology behind the products I review so much as how they perform for me as I use them in real fishing conditions. I study the tech, but I don’t dwell on it, other than how it affects performance. One of the attributes Fin Nor hypes is that the outside layer on both the front and back sides of the lenses are oleophobic and hydrophobic.

I know the word “hydrophobic.” Something that is hydrophobic “hates” or repels water. I expect most sunglasses will repel water. I looked up the definition of “oleophobic” in an online dictionary: Having a lack of affinity for oils. Most of the sunglasses I’ve owned seem to be “oleophilic” – their lenses attract grease and oils – mostly from finger smudges, I’ll admit – perhaps from sunscreen or insect repellent; often it just seems to accumulate from atmospheric oils, if there is such a thing.

I knew this when I put on my Fin Nor sunglasses and my immediate thought was, “I sure hope they live up to the hype.” The picture was crystal clear, almost like I’d cleaned the lenses in my eyes. I chose the green mirrored glass lenses in the grey North Drop frames. The mirrored lenses reflect both the direct sunrays, but also the rays that bounce off the lake’s surface. The green color comes from the mirror finish being applied over copper tinted glass. The copper (also available in non-mirror version) is good for inshore fishing when underwater visibility from the polarized lenses is important. The North Drop frames shield my eyes from light coming in from the sides, without looking like safety glasses. Rubberized nose-bridge and ear pieces help keep the glasses in place.

And they are oleophobic – mostly. Sure, if I grab the glasses by the lens immediately after smearing on some sunscreen, they’ll have an oily smudge. The grease and oil doesn’t just drip off, but in the course of a day, there’s no oily build up as I put on the glasses, take them off repeatedly for a variety of reasons. What’s there wipes off easily without getting out the Windex. There’s no build up of atmospheric “oleo” either.

I used these glasses daily on a late summer trip to the Pacific Northwest fishing out on the ocean. Those of you who have fished saltwater understand most sunglasses need to be cleaned with freshwater several times daily as they haze over from the salt-air. This didn’t happen with the Fin-Nor sunglasses.

Check out all the options and designs at

This site also lists local retail outlets for in person shopping and there are numerous online shopping options. 



I’ve fished all five of the Great Lakes for smallmouth bass, but it’s always been away trips on a friend’s boat or with a guide who furnished me with the rods and reels to use on those excursions.  I was sorting and arranging my “overstock” of fishing rod and reel combos several months ago and it dawned on me my personal selection of bassin’ sticks were “vintage” to put it mildly.

I needed an upgrade. What better place to shake some sticks and wind some handles than at the ICAST show where the top companies come each year to display their wares. It was overwhelming so I headed to the Daiwa booth and contacted a couple of the D-wa guys working there to enlist their help in choosing an outfit that would fit my needs and budget.

They pointed me to the Tatula SV70 reel and paired it with a medium action, Tatula rod. I don’t pretend to be a bass gear historian, but I quickly realized this reel is drastically smaller than even some of my later model “vintage” reels. I mentioned this and the Daiwa rep explained that’s because it’s designed from the bottom up to be spooled with braid. It will hold 90 yards of 10-pound braid or over 50 yards of thirty – plenty for any bass that swims the Great Lakes.

Even though the reel is small, it’s built with the bearings, gearing and other features that makes it easy to cast, smooth as butter to reel and plenty strong to manhandle Great Lakes smallies and more. I selected the reel with the 6.3:1 gear ratio, but faster ratios are available. The one feature that set the reel apart from others I considered is what Daiwa called T-Wing System (TWS) because the level wind line guide is T-shaped instead of round or oval. That adds to the castability for smoothness and distance.

I like relatively long rods so I paired it with a seven footer, the TTU701MRB  Tatula model. It’s light weight but medium in action. Recommended for 8 to 17 pound line, I spooled my reel with 20# braid and have tamed smallies up to 5 pounds with ease.

If you are a bass angler at any level, this Tatula combo will look good in your arsenal and feel good in your hands. Widely available, for more info go to



I’ve been looking for the “perfect” rod holder to use when trolling with Dipsey Divers. Most any will do the chore in the spring or for walleye trolling when I want the diver and lure to only go 20 or 30 feet deep, but in mid-summer, when trying to put a magnum Dipsey or Size 5 Deeper Diver down to the thermocline, what’s needed is a rod holder that will hold up to the strain and almost as important is a rod holder that will allow the rod to easily be pulled out of the holder when a crazed king or lunker laker has latched onto the lure down in the depths.

It’s easy to build a rod holder strong enough to stand up to the strain, but I’ve yet to come across a “pipe-style” holder that passes the ease-of-use test. Few young anglers or inexperienced trollers have the strength or the know-how to pull the rod forward sufficiently to relieve the pressure and then remove the rod so they can actually start fighting the fish. 

A couple of brands I’ve used were easy for youths and newbies, but they didn’t hold the rod securely. I feared an errant bump from a person on the boat or unexpected wave could result in the rod going overboard. That’s why I took a second look and then a third at the Scotty R-5 Rod Holder when I saw it at ICAST.

Unlike most rod holders, the R-5 has a moving part – called a “lock bar” that keeps the rod locked down while it’s being trolled. The lock bar securing the rod in place can’t release until the part of the rod at the front of the holder is manually lifted. That’s the normal/logical way to grab a rod being tortured by a fish at the end of the line. Basically, just lift it free. As the front is lifted the lock bar “unlocks” and the rod is free. 

Early on in my fishing career I used and either broke or discarded various brands of plastic rod holders. They just weren’t tough enough for the Great Lakes and Great Lakes fish. The Scotty R-5 is plastic, but it’s thick, tough plastic and Scotty has reputation for making quality products using quality materials. I’m sure the R-5s on my boat will be there for decades.

I don’t have a track system on my boat so I chose the “290” version of the R-5 which includes a side or deck mount. I was able to just bolt that mount to my rod holder/’rigger support. Scotty does make mounting options for use with most track systems. Check it all out at

Available retail at authorized Scotty downrigger outlets. Most Scotty products, including the R-5 can be purchased online at 



When it comes to cars, you’ve probably heard of “crossover” vehicles. These are roadsters which do quite well for a multitude of purposes. They aren’t built for hardcore off-roading, but they’ll do fine on snowy roads before the snowplows clear the highways. They aren’t quite mini-vans for hauling families around town or on longer road trips but they aren’t family sedans either.

I needed a pair of “crossover” boots. A pair I can put on in the morning and will keep my feet warm, comfortable and protected on those days when my activities take me from home, to office, to running errands, to my boat. I chose a pair of Baffin’s Eastern model of men’s boots..          

Since 1979, the Baffin “footwear” company has been keeping feet warm and comfortable across Canada and the rest of the world. If you are looking for some hardcore footwear for a variety of outdoor activities and over a wide range of temperatures, you’d do well to check them out at Many of their boots are built for extreme conditions and activities, but Baffin puts just as much quality in their less demanding footwear.

The Easterns are rated “northern” on the Baffin insulation index, which means they are lightly insulated, not something you’d want to wear all day outdoors on the coldest days. For those, choose something Tundra, Arctic or Polar Rated. “Northern” is perfect for fall and early spring outdoor activities, though I wear mine all winter when I’m only going to be outdoors for short periods. They have an aggressive tread pattern to give traction on sloppy sidewalks. At 7.5 inches tall, they aren’t for deep snow, but are great for sloppy conditions. They are crossovers!  Easterns are both waterproof and breathable to keep my feet dry as I hike across wet marina parking lots or when checking out the action at the fish cleaning station.

Available in brown leather or black, they are perfect for wearing to meetings, trips to the dentist or just on those days when you know your feet might face a variety of unscheduled activities. They are easy on and off, thanks to the stretchy panels over the ankle area and convenient pull loop at the back. The stretchy ankle material also keeps these slip-ons from feeling as though they are also slip offs.

If you are looking for an all-purpose – light duty, but rugged pair of crossover boots/shoes give the Easterns a look. They are widely available at online sources as well select retail outlets. 



I love it when a spoon gets scratched and scuffed from fish after toothy fish biting down on it. I hate it when I pull a spoon out of my tacklebox and discover scratches and scuffs caused by banging around inside the storage container where rough handling or a rough boat ride caused the other spoons in the box to do the work supposedly reserved for fish teeth.

  I’ve had a few “good” enough spoon storage boxes over the years – none that were perfect. Most worked by having some sort of hanging system which would hold them in place and let them dangle. That’s a good system until the spoon box tips or one of the spoons drops to the bottom of the box. 

The Flambeau Outdoors Spoon Trunk solves the dangling, jingling and tipping wreck problems.  Start with a not-so-basic open box sized to hold up to 63 spoons – from small, walleye sizes to magnum, trout and salmon models. I call the box not so basic because the plastic is made with Flambeau’s proprietary Zerust Technology that eliminates or lessens corrosion on the hooks, hardware and spoons contained inside. An O-Ring gasket makes the lid completely waterproof and that lid locks down tight with a cam-lock closure system.

Inside there’s a thick, closed cell foam layer on the bottom which has the 63 pre-cut slots to insert the front end of the spoons. Next is a thin plastic overlay that outlines each spoon slot to guide pushing them in place when being stored.

It’s simple and effective. The spoons are individually held apart to keep them from scratching or scuffing and it’s easy to see the pattern you need and pull it out.

Spoon Trunks are widely available in retail shops and at numerous online sources. Check out all of Flambeau’s tackle and gear storage options at